Carrier 33AW-CS1 User Manual

Also see for Comfort series: Installation instructions Limited warranty Owner's guide Owner's manual Installation instructions

Contents

Carrier 33AW-CS1 User Manual Manual pdf 14 page image

14Advanced Programming OptionsChanging your Feature settingsNow you can change the settings of different features withthe NUI. Here is how you can program you thermostatsettings.Open the door.1.Press home (2. ) and away ( ) buttons andhold for 3 seconds. You will see parameter number “1”is flashing in the time display area.Press mode (M) button, you will see parameter value3.will be flashing in the temperature display area of thedisplay.Press up or down buttons to change the settings to4.your desired value, which should be within the rangespecified for that parameter and specified icon will bedisplayed for that particular parameter.Press the mode (M) button or OK button to freeze5.your settings.If you press OK button, it will save yourtsettings and parameter value will be flashing,you can change the value further.If you press mode (M) button, it will save thetsettings and it will enable the next parameterto be changed. The parameter number will beflashing.Press up and down button to go to the next6.parameter. (If the current display is at parameternumber).You can program all your parameters by following7.the same procedure. Once you completed, press OKor zone ( ) button to save your settings and willreturn to the normal display screen (If the currentdisplay is at parameter number).Close the door.8.Note: Refer features table for more details of parameters.English