Carrier 33AW-CS1 User Manual

Also see for Comfort series: Installation instructions Limited warranty Owner's guide Owner's manual Installation instructions

Contents

Carrier 33AW-CS1 User Manual Manual pdf 5 page image

5Quick StartSetting the time and dayChanging the temperatureYou must set the time and day before you can use any of theNUI’s programming features.Open the door1.Press D/H/M SET CLOCK (2. ) button.Press the up or down button, to change the hour.3.Stop on the correct hour.Press the D/H/M SET CLOCK (4. ) symbol buttonagain and the minutes will flash on the display.Press the up or down button to change the minutes.5.Stop on the correct number.Press the D/H/M SET CLOCK (6. ) symbol buttonagain and day will flash on the display.Press the up or down button to change the day.7.Stop on the correct number.Press OK button or close the door.8.There are times when you want to change temporarytemperature. Here’s how.Open the door1.Press mode (M) button to select the desired mode.2.Press up or down buttons on the right side until youreach the desired temperature setting. This creates a“temporary hold” until the next pre-set time period.You will see schedule active icon( ) flashing on the display.To maintain that temperature setting so it doesn’t3.change during the next pre-set time period, presshold ( ) symbol button on the left side. Thetemperature will stay at the setting you selected untilyou release the hold. The schedule active icon ( )will disappear.To return the temperature to the pre-set level for that4.time period, press hold ( ) symbol. This releasesthe hold and the temperature will return to itsprogrammed level. The schedule active icon ( ) willappear.Close the door.5.English