INDOOR UNIT INSTALLATIONStep one: choosing installation locationStep two: install wall-mounting framerm it with the client.1. Hang the wall-mounting frame on the wall; adjust it in horizontal position with theplastic expansion particles in the holes.3. Fix the wall-mounting frame on the wall with tapping screws (ST4.2X25TA) and.1. Choose the position of piping hole according to the direction of outlet pipe. Theposition of piping hole should be a little lower than the wall-mounted frame,shown as below.Step three: open piping hole2. Open a piping hole with the diameter of 2 1/6 in (55mm) 2 3/4 in (70mm)position.In order to drain smoothly, slant the piping hole onLeftWallRightMark in the middle of it Level meterRear piping holeWallSpaceto thewallabove5 9/10 in(150mm)5 9/10 in(150mm)Spaceto thewallaboveRear piping holethe wall slightly2 1/6 in (55mm) 2 3/4 in (70mm) 2 1/6 in (55mm) 2 3/4 in (70mm)-26-