5DISPLAY PANELSNOTE: The display panel on the indoor unit can be turned on or off using the LIGHT button on the remote control.On the Unit:A12547Receive windowHeatCoolPowerDryON/OFFSET TEMP/AMBIENT TEMPA12546* The temperature readout will be replaced by an error code if there is a malfunction.Remote Control DisplayAUTOCOOLDRYFANHEAT132116791514 131285410MODE DISPLAYNOTE: Symbols shown in this manual are for the purpose of demonstration. During actual operation, only the relevantsymbols are displayed.SLEEP A123911. TRANSMISSION INDICATOR: Illuminates when re-mote control transmits signals to the indoor unit.2. This symbol appears when the unit is turned on by the re-mote control, and disappears when the unit is turned off.3. FAN SPEED DISPLAY: Indicates the set fan speed.AUTO is displayed when unit is running in AUTO mode.4. MODE DISPLAY: Indicates the current operation mode“AUTO”, “COOL”, “DRY”, “FAN ONLY”, or “HEAT”5. SLEEP DISPLAY: Indicates unit is running in SLEEPmode.6. TEMPERATURE DISPLAY: Temperature setting from61_F (16_C) to 86_F (30_C) will be displayed. If FANmode is selected, there will be no temperature displayed.During DEFROST operation, H1 will be displayed. DuringSAVE mode, SE will be displayed.7. Left/Right Louver Swing: Not available on these models.8. HEALTH/SAVE: HEALTH is not available. SAVE isavailable on sizes 18k and 24k. SAVE mode can be appliedto cooling mode and when set point is less than 80_F(27_C).9. SETTING ON / OFF TIMES: 0.5 to 24 hours.10. TURBO DISPLAY: Displayed when unit is running inTURBO mode.11. DRY COIL DISPLAY: Indicates unit is running in DRYCOIL mode where the fan continues to run after the unit isshut off to dry the coil.12. TEMPERATURE DISPLAY: Displays set point or roomtemperature.13. SWING DISPLAY: Sets louver position or set louvers tocontinuously move for better air distribution.14. LIGHT DISPLAY: Indicates if LED display on the frontpanel is illuminated or not.15. LOCK DISPLAY: Indicates if remote control is locked.