5Remote Control DisplayAUTOFAN OPERºFºCHOURON/OFF:121167915141312854103A096271 TRANSMISSION INDICATOR: Illuminates when remotecontrol transmits a signal to the indoor unit.2 ON/OFF INDICATOR: This symbol appears when the unitis turned on by the remote control, and is not displayed whenthe unit is turned off.3 FAN SPEED DISPLAY: Indicates the set fan speed. AUTOis displayed when fan is set to AUTO mode.4 MODE DISPLAY: Indicates the current operation mode“AUTO”, “COOL”, “DRY”, “FAN ONLY”, or “HEAT”AUTOCOOLDRYFANHEAT(only for cooling and heating unit)A09628a5 SLEEP DISPLAY: Indicates unit is running in SLEEP mode.6 TEMPERATURE DISPLAY: Temperature setting from61_F (16_C) to 86_F (30_C) will be displayed. If FAN modeis selected, there will be no temperature displayed.7 CLOCK DISPLAY: Indicates the current time (0 to 24hours).8 CLOCK INDICATOR: Displayed with time and is notdisplayed when setting ON/OFF timer.9 TIMER ON / TIMER OFF DISPLAY: ON is displayed ifTIMER ON is set. OFF is displayed if TIMER OFF is set.ON OFF is displayed if both ON and OFF timers are set.10 TURBO DISPLAY: Indicates unit is running in TURBOmode.11 DRY COIL DISPLAY: Indicates unit is running in DRYCOIL mode where the fan continues to run after the unit isshut off to dry the coil.12 TEMPERATURE DISPLAY: Indicates if room temperatureor set point temperature is being displayed on the front panel.13 SWING DISPLAY: Indicates that louvers are movingcontinuously for better air distribution.14 LIGHT DISPLAY: Indicates if LED display on the frontpanel is illuminated or not.15 LOCK DISPLAY: Indicates if remote control is locked ornot. (Available on 40GXC(Q) models only)NOTE: Symbols shown in this manual are for the purpose of demonstration. During actual operation, only the relevant symbols aredisplayed.