16Adjustment of Air Direction• For details, refer to the Owner’s Manual attached to the indoor unit.To operate the discharge louver automatically1 Selection of MONITOR/SETPush “MONITOR/SET” button to match to “SET”.If the operation stops,push “ON” button. “ON” indication goes on.2 Selection of LOUVERPush “LOUVER” button. “LOUVER” indicationgoes on.Push “MONITOR/SET” button again to match to“MONITOR”, and setting completes.FILTER RESET49 6433 4817 321SET ONMODECOOLONUNIT2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 FANAUTOTEMP.LOUVERLOUVERFANTEMP.MODEMONITOR/SET ALL/ZONE ZONE UNIT ON CENTER/LOCKED CHECKZONE SET/ENTER SELECT OFF TIMER ON21˚CTo fix the discharge louver at a specific positionPush “MONITOR/SET” button to match to “SET” while the air conditioner operates (Louver operation), and push the“LOUVER” button.• “LOUVER” indication goes off.Push “MONITOR/SET” button again to match “MONITOR”. Then the setting completes.• The discharge louver stops soon.REQUIREMENTDo not move the discharge louver directly with hands. It may cause a trouble.Select the direction of the discharge louver by the Louver operation button on the remote controller.When using an air conditioner of which discharge louver has no AUTO functionWhen using the central remote controller on an air condi-tioner of which discharge louver has no AUTO function,“LOUVER” and “MANUAL” indications go on by pushing theLouver operation button, after a while they go off.• In this time, fix the discharge louver to the desired positionfor usage.NOTIFICATION• If cooling operation is performed with downward discharging of louver, dewing is caused on the cabinet orsurface of the louver resulted in falling of dewdrops.• If heating operation is performed with horizontal discharging of louver, temperature unevenness may becomelarge in the room.LOUVERMANUAL