Carrier 40RC003603 Owner's Manual

Contents

9OperationSetting to the operation mode (MODE, FAN, TEMP., etc.), the operation handling mode (Last-push priority/CENTER/LOCKED), timer link, and louver operation can be set for individual unit, for a zone, or for all units.Individual setting[Example] When Unit No. 1 to 17, 32, 33, 48, 49, 64 air conditioners are connected, start (or stop) Unit No.64 air condi-tioner.1 Selection of MONITOR/SETPush “MONITOR/SET” button to match to“SET”. “MONITOR” indication goes off and“SET” indication flashes.2 Selection of UNIT No.Push “UNIT” button to match to UNIT No. to beset.3 Selection of Last-push priority/CENTER/LOCKEDPush “CENTER/LOCKED” button to matchindication to “No indication (Last-push prior-ity)”, “CENTER” or “LOCKED”.(NOTE) Every pushing the button, indicationchanges in the following order.FILTER RESET49 6433 4817 321SET CENTERONMODECOOLONUNIT2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 FANAUTOTEMP.˚CLOUVERLOUVERFANTEMP.MODEMONITOR/SET ALL/ZONE ZONE UNIT ON CENTER/LOCKED CHECKZONE SET/ENTER SELECT OFF TIMER ONFILTER RESET49 6433 4817 321SET CENTERONMODECOOLONUNIT2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 FANAUTO TEMP.˚CLOUVERLOUVERFANTEMP.MODEMONITOR/SET ALL/ZONE ZONE UNIT ON CENTER/LOCKED CHECKZONE SET/ENTER SELECT OFF TIMER ON45 4 4 42314 SETMatch MODE, FAN, TEMP., LOUVER, etc.(For details, see pages 15 to 16.)5 ON/OFFON Push “ON” button.“ON” indication goes on.OFF Push “OFF” button.“OFF” indication goes on.No indicationLast-pushpriority CENTER LOCKED( )• Indication example (In case of Unit No. 64)Not connectedNo indicationConnected(During OFF status)64Connected(During ON status)64ENDSelection of MONITOR/SETPush “MONITOR/SET” button again to match to “MONITOR”.“SET” indication goes off, and “MONITOR” indication goes on.• Indication returns automatically to “MONITOR” after 15 seconds even if END step is not executed, andsetting operation completes.• In setting ON/OFF only of the air conditioner, operation in steps3 and4 is unnecessary.