Carrier 53KHET 12 Installation Manual

11. GENERAL NOTES TO INSTALLERSplit room air conditioner has been carefully designed and manufactured under strict Quality Controlconditions.Therefore you are completely responsible for proper installation completion and operation of theair conditioner.Carefully read the manual carefully before proceeding with the installation to ensure correctinstallation. This manual describes installation instructions to help ensure trouble free operationand extended life of the air conditioner.Make sure all accessory parts are with the system before beginning installation. You will need the following tools for installation:1. Standard screwdriver 10. Flaring tool set2. Phillips head screw driver 11. Pipe bender3. Electric drill, Hole core drill 12. Hexagonal wrench ( 4mm )4. Measure tape 13. Torque wrench5. Water level gauge 14. Vacuum pump6. Pipe clamp 15. Gas leak detector7. Pipe cutter 16. Gauge manifold8. Spanner ( half union ) 17. Thermometer9. Reamer 18. Electrical millimeter19. Measuring tape After completion of installation, perform a run test and give the customer fullinstructions on the correct operation of the air conditioner including:• Turning the unit on and off. • Removal and cleaning of the air filters.• Functions of the remote control. • Re-installation of air filters after cleaningLeave the owner manual with the customer so that it can to be used during operation of the airconditioner.Leave the installation manual with the customer so that it can be used for any service andmaintenance operations. Advise the customer to the tips of energy saving while operating the air conditioner asmentioned in the owner’s manual.