Carrier 61WG 020 Installation, Operation And Maintenance Instructions

Contents

234.7 - Electrical data, optional hydronic moduleThe pumps that are factory-installed in these units comply with the European Ecodesign directive ErP. The additionalelectrical data required* is as follows:Motors of fixed-speed hydronic module pumps, 61WG/30WG/30WGA (options 116T and 270T)No.** Description*** 61WG/30WG/30WGA - options 116T and 270T (low-pressure pumps)20 25 30 35 40 45 50 60 70 80 901 Nominal efficiency at full load and nominal voltage % 81,1 81,1 81,1 81,1 81,1 81,1 81,1 81,1 81,1 81,1 83,41 Nominal efficiency at 75% rated load and nominal voltage % 80,8 80,8 80,8 80,8 80,8 80,8 80,8 80,8 80,8 80,8 81,21 Nominal efficiency at 50% rated load and nominal voltage % 77,5 77,5 77,5 77,5 77,5 77,5 77,5 77,5 77,5 77,5 78,32 Efficiency level IE33 Year of manufacture This information varies depending on the manufacturer and model at the time ofincorporation. Please refer to the motor name plates.4 Manufacturer's name and trademark, commercial registrationnumber and place of manufacturer5 Product's model number6 Number of motor poles 2 2 2 2 2 2 2 2 2 2 27-1 Rated shaft power output at full load and nominal voltage (400 V) kW 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 0,8 1,37-2 Maximum power input (400 V)**** kW 1,1 1,1 1,1 1,1 1,1 1,1 1,1 1,1 1,1 1,1 1,68 Rated input frequency Hz 50 50 50 50 50 50 50 50 50 50 509-1 Rated voltage V 3 x 4009-2 Maximum current drawn (400 V)† A 2,1 2,1 2,1 2,1 2,1 2,1 2,1 2,1 2,1 2,1 2,910 Rated speed rpm 2850 2850 2850 2850 2850 2850 2850 2850 2850 2850 2890r/s 47 47 47 47 47 47 47 47 47 47 4811 Product disassembly, recycling or disposal at end of life Disassembly using standard tools. Disposal and recycling using an appropriatecompany.12 Operating conditions for which the motor is specifically designedI - Altitudes above sea level m < 1000††II - Ambient air temperature °C < 40IV - Maximum air temperature Please refer to the operating conditions given in this manual or in the specific conditionsin the Carrier selection programs.V - Potentially explosive atmospheres Non-ATEX environmentMotors of variable-speed hydronic module pumps, 61WG/30WG/30WGA (options 116V and 270V)No.** Description*** 61WG/30WG/30WGA - options 116V and 270V (high-pressure pumps)20 25 30 35 40 45 50 60 70 80 901 Nominal efficiency at full load and nominal voltage % 83,4 83,4 83,4 83,4 83,4 83,4 84,8 84,8 84,8 84,8 84,81 Nominal efficiency at 75% rated load and nominal voltage % 81,2 81,2 81,2 81,2 81,2 81,2 82,2 82,2 82,2 82,2 82,21 Nominal efficiency at 50% rated load and nominal voltage % 78,3 78,3 78,3 78,3 78,3 78,3 79 79 79 79 792 Efficiency level IE33 Year of manufacture This information varies depending on the manufacturer and model at the time ofincorporation. Please refer to the motor name plates.4 Manufacturer's name and trademark, commercial registrationnumber and place of manufacturer5 Product's model number6 Number of motor poles 2 2 2 2 2 2 2 2 2 2 27-1 Rated shaft power output at full load and nominal voltage (400 V) kW 1,3 1,3 1,3 1,3 1,3 1,3 1,7 1,7 1,7 1,7 1,77-2 Maximum power input (400 V)**** kW 1,6 1,6 1,6 1,6 1,6 1,6 2,4 2,4 2,4 2,4 2,48 Rated input frequency Hz 50 50 50 50 50 50 50 50 50 50 509-1 Rated voltage V 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 4009-2 Maximum current drawn (400 V)† A 2,9 2,9 2,9 2,9 2,9 2,9 4,2 4,2 4,2 4,2 4,210 Rated speed rpm 2890 2890 2890 2890 2890 2890 2870 2870 2870 2870 2870r/s 48 48 48 48 48 48 48 48 48 48 4811 Product disassembly, recycling or disposal at end of life Disassembly using standard tools. Disposal and recycling using an appropriatecompany.12 Operating conditions for which the motor is specifically designedI - Altitudes above sea level m < 1000††II - Ambient air temperature °C < 40IV - Maximum air temperature Please refer to the operating conditions given in this manual or in the specific conditionsin the Carrier selection programs.V - Potentially explosive atmospheres Non-ATEX environment* Required by regulation 640/2009 with regard to the application of directive 2009/125/EC on the eco-design requirements for electric motors** Item number imposed by regulation 640/2009, annex I2b.*** Description given by regulation 640/2009, annex I2b.**** To obtain the maximum power input for a unit with hydronic module add the maximum unit power input from the electrical data table to the pump power input.† To obtain the maximum unit operating current draw for a unit with hydronic module add the maximum unit current draw from the electrical data table to the pump currentdraw.†† Above 1000 m, a degradation of 3% for each 500 m should be taken into consideration.