Carrier AQUAZONE 50HQP072-120 Installation And Service Instructions Manual

Contents

4a50-8531Fig. 1 — Unit DimensionsHANGER BRACKET DIMENSIONS221cm2.54cmPLAN VIEWTOP10.8cm86.6cmFRONTCONTROL BOXUTS V3.3cmcondensate LEFT RETURN LEFT VIEW-AIR COIL SIDELEFT RETURN END DISCHARGECBPEAPBSPCAPCAPFRONTEDFGCAPCBPCAPEAPBSPFRONTFRONTCONTROL BOXPLAN VIEWTOPV S URIGHT RETURN RIGHT VIEW-AIR COIL SIDERIGHT RETURN END DISCHARGE3.3cmcondensate drain3LEFT RETURN STRAIGHT DISCHARGECAPCAPFRONTBSPAEAPCBPBCOPQRKMFG EDBSPRIGHT RETURN STRAIGHT DISCHARGE1EAP2 CAPCAP 2FRONTCBP154SERVICE ACCESS3’ (91 cm.) TYPICALALL CONFIGURATIONSNOTES:1. All dimensions in centimeters, unless indicated.2. Access is required for all removable panels and installer shouldtake care to comply with all building codes and allow adequateclearance.3. Water inlet and outlet connections are available on either side ofthe unit. Plugs are shipped loose in a plastic bag tied to the waterleg in front of the unit. Installer must plug unused connection.4. Condensate drain connection is on end opposite of comressor.5. Electrical access is available on either side of the front of the unit.6. Electrical box is on right side but can be field-converted to left.LEGENDBSP — Blower Service PanelCAP — Control Access PanelCBP — Control Box PanelEAP — Expansion Valve Access PanelCONNECTIONSWater Outlet 11 /4FPT (072,096)1 1/2FPT (120)Water Inlet 11 /4FPT (072,096)1 1/2FPT (120)CondensateDrain 3/4FPTHigh VoltageAccess 1 1/8K.O.Low VoltageAccess 7 /8K.O.12345UNIT50HQPOVERALLCABINET(cm)DISCHARGECONNECTIONS (cm)(Duct Flange [± 0.1 cm])WATERCONNECTIONS(cm)ELECTRICALKNOCKOUTS(cm)RETURN AIRCONNECTIONS (cm)(Using Return Air Opening)ADepthBWidthCHeight D ESupplyDepthFSupplyHeightG K L M O P Q R SReturnDepthTReturnHeightU V072-120 92.2 215.6 54.9 35.6 43.2 34.3 19.8 38.1 21.1 10.2 5.1 47.8 42.7 35.1 165.1 45.7 2.5 48.0