Carrier Air V Owner's Manual

Also see for Air V: Installation instructions Owner's guide Owner's guide Owner's guide Owner's manual

Contents

Carrier Air V Owner's Manual Manual pdf 12 page image

OWNER’ S GUIDE -11STEP 3 - INSTALLING THE HEATER ASSEMBLYPlace the heater assembly wire (See , Figure 5) into the hole located on the ceiling assembly. Insert the twoexisting ceiling assembly screws into the heater assembly guides then slide the heater assembly to the reardirection. Fasten the heater assembly to the ceiling assembly by using two screws (See , Figure 5).Plug the heater assembly electrical harness (See , Figure 5) into the back of the air sweep motor bracket (See, Figure 5). Make sure that the “ridged”side of the plug is aligned and matched with the “ridged” side of theair sweep motor bracket connection. DO NOT USE EXCESSIVE FORCE (See Figure 5).Figure 5STEP 4 - ELECTRICAL WIRINGMAKE SURE THAT ALL POWER SUPPLY TO THE UNIT IS DISCONNECTED BEFORE PERFORMING ANY WORK ON THEUNIT TO AVOID THE POSSIBILITY OF SHOCK OR INJURY AND/OR DAMAGE TO THE EQUIPMENT.WARNINGROUTING 115V AC WIRING12