Carrier ComfortVu TBPL-24-H Installation And Operation Manual

Contents

Carrier ComfortVu TBPL-24-H Installation And Operation Manual Manual pdf 46 page image

ComfortVu™ BACnet Thermostat Model Standard TB-HM (Line voltage)Carrier Proprietary and Confidential CARRIER CORPORATION ©2020Installation and Operation Guide All rights reserved42Enter Technician Settings mode:1 Adjust the setpoint temperature to 10ºC or 50ºF.2 Press and hold the [C/F] button for 10 seconds to enter Technician Settings mode. “P01” will appear on thedisplay.View objects and make adjustments: Use the [Mode] button to step forward between different settings. Use the [Fan] button to step backward between different settings. Press the [On/Off] button to exit Technician Settings and return to normal display. If no button is pressed for 60 seconds, the thermostat will automatically exit Technician Settings and return tonormal display. Use the [+] or [-] button to make adjustments when required.Technician Settings P01 to P03P01 – Offset for temperature readings calibrationRange: -6…+6°C / -9…+9°F.Default: 0°C / 0°F.Note: The offset will influence both internal or external sensors.P02 – Setpoint limit for coolingRange: 5…35°C / 41…95°F.Default: 10°C / 50°F.Note: The thermostat will stop cooling regardless of the user’s setpointP03 – Setpoint limit for heatingRange: 5…35°C / 41…95°F.Default: 30°C / 86°F.Note: The thermostat will stop heating regardless of the user’s setpointTechnician Settings