Carrier Connect Installation Manual

Carrier Connect Installation Manual Manual pdf 35 page image

Using the Carrier® Connect™ Wi-Fi Thermostat's screensCarrier Connect™Wi-Fi Thermostat Carrier Proprietary and Confidential CARRIER CORPORATION ©2017Installation Guide 31 All rights reservedY1 Y2 W1 W2 GFan Off Off Off Off On OffCool (1) On Off Off Off On OffCool (2) On On Off Off On OffDehumidify Off Off Off Off On OnCool (1) and Dehumidify On Off Off Off On OnCool (2) and Dehumidify On On Off Off On OnHeat (1) On On Off Off On OffHeat (2) Off Off On Off X OffHeat (1) and Dehumidify Off Off On On X OnHeat (2) and Dehumidify Off Off On On X OnFANUse this screen to adjust fan operation. The default setting for fan operation is AUTO for both OCCUPIED andUNOCCUPIED periods. When operating in AUTO MODE, the fan only runs when there is an active heating or coolingdemand. When you select ON, the fan runs continuously, except during the BLOWER ON DELAY when a heat cycleis starting. There will be a 30-second minimum on/off timer when changing the FAN MODE.These selections are not available if the thermostat has been configured for non-programmable operation.CAUTION The AUTO selection is a violation of the ASHRAE 90.1 and California Title 24, but is a feature ofthe thermostat for building owners that mandate auto fan operation during occupied periods for energyconservation purposes.PROGRAMYou can only view the program schedule on this screen on the thermostat. You cannot adjust the schedule orsetpoints. Permanent program schedule changes require the Connect App. Making temporary changes or pausingthe program schedule are outlined in Using the Connect App (page 13).The top center of the screen displays the program schedule day of the week. Swipe up or down to move from oneday to the next on the program schedule. The vertical yellow Row Indicator moves up and down at the same time.• The horizontal blue lines show the cool setpoints above, for each of the 4 programmable periods of the day(up to 3 occupied periods and 1 unoccupied period, if configured).• The horizontal red lines show the heat setpoints below, for each of the 4 programmable periods of the day.• Occupied and Unoccupied icons appear at the top of each period.