Carrier Elegant 53KFE60 Owner's Manual

Contents

-١١-OPERATING UNIT THROUGH REMOTE CONTROL (Cont.)6.5 DRY ModeUse DRY mode to set the desired temperature at low fan speedwhich provides you with the dehumidifying surroundings.Start:1. Press ON/OFF button to start the air conditioner.2. Press MODE button to select DRY mode.The selected DRY mode will appear on the display of theoperation panel of the indoor unit.3. Press ADJUST ▼ or ▲ button to set the desiredtemperature. The temperature can be set within a rangeof 17°C ~ 30°C in 1°C increments.Stop: If you want to stop the air conditioner,Press ON/OFF button again.NOTE:In DRY mode, you can not select the fan speed.6.6 AUTO ModeStart:1. Press ON/OFF button to start the air conditioner.2. Press MODE button to select AUTO mode.The selected AUTO mode will appear on the display of theoperation panel of the indoor unit.3. Press ADJUST ▼ or ▲ button to set the desiredtemperature. The temperature can be set within a rangeof 17°C ~ 30°C in 1°C increments.Stop: If you want to stop the air conditioner,Press ON/OFF button again.NOTES:1. In the Auto mode, the air conditioner can logically choose the modeof Cooling, and Fan by sensing the difference between the actualroom temperature and the set temperature on the unit control panel.If the actual room temperature is 2°C above the set point, the unitoperates in cooling mode. When the actual room temperature is 1°Chigher above the set point but 2°C lower below the set point, the unitwill select the Fan mode.2. In the Auto mode, you can not switch the fan speed.It has already been automatically controlled.3. If the Auto mode is not comfortable for you , the desired mode can be selected manually.4. If the Eco mode is activated when the unit is operating in Auto mode, the fan speed will change intoLow speed mode immediately.13321332