Carrier Elegant 53KFE60 Owner's Manual

Contents

-٢٠-OPERATING UNIT THROUGH ELECTRONIC OPERATION PANEL (Cont.)7.3 COOL Mode :Start:1. Press ON/OFF button (1) to start the operation of the air conditioner.2. Press MODE button (2) to select Cool mode.The selected Cool mode will appear on the display of the operation panel of indoor unit.3. Press FAN SPEED button (3) to select the fan speed in three steps Auto, Low, or High.The selected Fan speed appear on the display of the operation panel of indoor unit.4. Press ADJUST ▼ or ▲ button (4) to set the desired temperature. The temperature can beset within a range of 17°C ~ 30°C in 1°C increments.Stop: If you want to stop the operation of the air conditioner, Press ON/OFF button again.NOTE:In the Cool mode, cooling begins automatically when the room temperature is 1°C above the set point,and stops when the room temperature is 1°C below the set point. The fans will not stop running.7.4 FAN (Ventilation) Mode :Start:1. Press ON/OFF button (1) to start the operation of the air conditioner.2. Press MODE button (2) to select Fan mode.The selected Fan mode appear on the display of the operation panel of indoor unit.3. Press FAN SPEED button (3) to select the fan speed in three steps Auto, Low, or High.The led of the selected FAN SPEED will appear on the display of the operation panel of indoor unit.Stop: If you want to stop the operation of the air conditioner, Press ON/OFF button again.NOTE:In the Fan mode, the setting temperature is not displayed in the remote controller and you are notable to control the room temperature either.142 312 3FAN SPEEDHIGHFAN SPEED AUTOHIGH