Carrier TruVu UCXP683T-V Installation And Startup Manual

Addressing the TV-UCXP683T-V through the Service portTruVu™ UCXP683T-V CARRIER CORPORATION ©2021Installation and Start-up Guide All rights reserved10To connect the TV-UCXP683T-V to the computer using a USB cable.1 Connect a USB Type-A Male to Male USB cable from a computer to the controller's USB Service Port, asshown below.2 A new Ethernet connection will appear on your computer.3 If your computer uses a static IP address, use the following settings for the new connection:○ Address: 169.254.1.x, where x is 2 to 7○ Subnet Mask: 255.255.255.248○ Default Gateway: 169.254.1.1If it uses a DHCP address, leave the address as it is.4 Open a web browser on the computerNavigate to http://local.access or http://169.254.1.1 to see the controller setup pages.See To set up the controller through the Service Port (page 48) for detailed information.