Carrier TruVu UCXP683T-V Installation And Startup Manual

To set up the controller through the Service portTruVu™ UCXP683T-V CARRIER CORPORATION ©2021Installation and Start-up Guide All rights reserved49Device tabBACnet ObjectDevice Instance Autogenerated—(Default) The Device Instance is automatically set to a numberusing the IP Address, Subnet information, and the Carrier vendor ID 16.Assigned—Lets you enter a specific number that is unique on the BACnet network.Device Name Autogenerated—(Default) The Device Name is automatically set as the worddevice + the Device Instance. For example, device2423911.Assigned—Lets you enter a specific name that is unique on the BACnet network.Device Location You can enter an intuitive location for the device in the i-Vu® interface.Device Description You can enter an intuitive description for the device in the i-Vu® interface.ConfigurationAPDU Timeout How many milliseconds the device will wait before resending a message if noresponse is received.APDU Segment Timeout How many milliseconds the device will wait before resending a message segmentif no response is received.APDU Retries The number of times the device will resend a message.Controller InformationClear Counts/Logs Clears Reset counters and the three message history fields from the ModuleStatus.Data Backup and RestoreBackup Displays time of the last backup. Click button to backup the controller's controlprograms, properties, and schedules.Restore Displays time of the last restore. Click button to restore the most recent backup ofthe controller's control programs, properties, and schedules.