Casio Aculaser M2 User Manual

Also see for Privia PX-5S: User guide Other Quick start guide User manual

Contents

Casio Aculaser M2 User Manual Manual pdf 22 page image

E-20Recording and Playing Back Phrases1. Press the cq (PHRASE) button.This displays the phrase selection screen shown below.2. Specify the number of the phrase you want tohear.• For details about how to do this, see “Changing aNumber or a Value” in “Operations Common to AllModes” (page E-9).3. Use the dt (w) button to select “Loop”, andthen use the eo minus (–) and plus (+)buttons to turn looping on or off.4. Play the phrase.• For details about how to do this, see “Starting andStopping Playback” in “Operations Common to AllModes” (page E-11).• The phrase loop setting is saved as a parameter foreach phrase.Changing the tempo settingThere are two different methods you can use to changethe tempo setting: using the TEMPO buttons ortapping a beat with a button.• You can use this procedure to adjust the tempo notonly for phrases, but also for other functions as well.■ To change the tempo using the TEMPObuttons1. Press the ct (TEMPO) button.• This displays the tempo screen shown below.2. Adjust the tempo (beats per minute) value asdesired.• For details about how to do this, see “Changing aNumber or a Value” in “Operations Common to AllModes” (page E-9).• You can also change the tempo value using the dkminus (–) and plus (+) buttons.• You can specify a tempo value in the range of 020 to255.3. Press the dr (EXIT) button.This exits the tempo screen.■ To adjust the tempo by tapping a beat1. Press the ct (TEMPO) button.This displays the tempo screen.2. Tap the ct (TAP) button four times at thespeed (tempo) you want to set.• The tempo setting will change in accordance withyour tapping speed as soon as you tap the fourthtime.3. After setting the tempo by tapping, you thencan use the procedure under “To change thetempo using the TEMPO buttons” (pageE-20) to make fine adjustments.Using the Phrase Selection Screen toSelect the Recommended Tone as theZone Part 1 Tone• For details about zone parts, see the separate“Tutorial”.1. Press the cq (PHRASE) button to display the“PHRASE SELECT” screen (page E-20) forselecting a phrase.2. Hold down the dl (BANK) button until itslamp starts to flash.The tone that was selected as the Zone Part 1 tone whenthe data was saved is the recommended tone.Listening to a PhraseOFF : One-time playbackON : Looped playbackPhrase number Phrase nameLoop setting