E-130Using the Function MenuThe function menu includes settings that normally need to beaccessed relatively infrequently, such as overall tuning,equalizer, touch response, local control on/off, etc. It alsoincludes some memory card operations (format, etc.).This section explains function menu operations. For detailsabout specific function menu items, see “Function MenuSettings” (page E-131).1. Press the R-13 (FUNCTION) button.• This displays the function menu like the one shownbelow.2. To adjust the “Tune” (Tuning) and “EQ”(Equalizer) settings, use the R-17 (t, y)buttons to move the 0 to the setting you wantto adjust, use the dial or the R-14 (–, +) buttonsto change the setting. The currently selectedsetting will also be indicated by thick brackets(%).• Pressing the R-14 (–, +) buttons at the same timereturns the setting to its initial default.• Changing the tuning value does not affect audioplayback (page E-126).3. The setting items from “Performance” andbelow are groups that include multiple settingitems. Use the following procedure to changethe settings of the items in each group.R-18R-18C-17C-17R-15R-15R-17R-17R-13R-13R-16R-16R-14R-14L-3L-3Using the Function MenuTo change the setting of a function menuitem(1) Use the R-17 (t, y) buttons to move the 0 to thedesired group name and then press the R-16 (ENTER)button.• This displays the items included within the group.(2) Use the R-17 (t, y, u, i) buttons to move the 0to the setting you want to change.(3) Use the dial or the R-14 (–, +) buttons to change thesetting value.• Pressing the R-14 (–, +) buttons at the same timereturns an item to its initial default setting.(4) To return to the function menu, press the R-15 (EXIT)button.Example: Performance group
