Casio CTK-7300IN User Manual

Also see for CTK-7200: Guidelines

Contents

Casio CTK-7300IN User Manual Manual pdf 47 page image

Using the Tone EditorE-46Tone areas numbered K:001 through K:100 are for storage ofuser tones. You can have up to 100 user tones stored inmemory at one time. You can recall a stored user tone bypressing the R-11 ([K] USER TONES) button. See “To selecta tone” (page E-14).1. Select the tone you want to edit in order tocreate your user tone.• Select the tone you want to edit from group A through J(preset tones) or group K (user tones).• The parameters you can edit for group L (drawbarorgan) tones are different from those that you can editfor group A through K tones. See “Editing DrawbarOrgan Tones” (page E-52) for more information.2. Press the C-8 (TONE EDITOR) button.• This displays the tone editor screen.• You can use the R-17 (u, i) buttons to scrollbetween pages.3. Use the R-17 (t, y) buttons to move the 0 tothe parameter you want to change.• For information about the operation and the settingrange of each parameter, see “Tone ParameterSettings” (page E-48).4. Use the dial or R-14 (–, +) buttons to change thesetting value.• Pressing the R-14 (–, +) buttons at the same timereturns a parameter to its initial default setting.5. Repeat steps 3 and 4 as required to configureother parameters.6. To save a rhythm after you edit it, hold downthe R-13 (FUNCTION) button as you press theC-17 (MENU) button.• This displays the tone editor menu.7. Press the R-16 (ENTER) button.• This displays a screen for specifying the destinationuser tone number and tone name.8. Use the dial or R-14 (–, +) buttons to select thedestination user tone number you want.9. Use the R-17 (u, i) buttons to move thecursor to the name character position you wantto change, and then use the dial or R-14 (–, +)buttons to select the character you want.• See “Supported Input Characters” (page E-160) forinformation about the characters you can input for thename.• To input a space, press both of the R-14 (–, +) buttonsat the same time.10. After everything is the way you want, press theR-16 (ENTER) button.• A message (Replace?) will appear on the display toconfirm whether you want to replace the existing datawith the new data. Press the R-14 (YES) button toreplace the existing data with the new data.Creating a User ToneUser Tone NumbersTo create and save a user toneParameter name Current settingTotal number of pagesCurrently displayed pageCurrently selected parameter(Enclosed by thick brackets %).Tone nameDestination user tone number