Casio CTK-7300IN User Manual

Also see for CTK-7200: Guidelines

Contents

Casio CTK-7300IN User Manual Manual pdf 14 page image

E-13Selecting and Playing a Tone1. Rotate the L-2 (VOLUME) knob towards MIN toset the volume to a low level.2. Referring to “Connections” (page E-11),connect headphones, amplifier, or other device.3. Use the L-1 (P) button to turn on power.• To turn off the Digital Keyboard, press the L-1 (P)button again.• Pressing the L-1 (P) button to turn off power actually putsthe Digital Keyboard into a standby state. Minute amountsof current continue to flow within the Digital Keyboard in thestandby state. If you do not plan to use the Digital Keyboardfor a long time or if there is a lightning storm in your area,be sure to unplug the AC adaptor from the power outlet.• If you press the L-1 (P) button only lightly, the displaywill light up momentarily but power will not turn on.This does not indicate malfunction. Press the L-1 (P)button firmly and completely to turn on power.• Under its initial configuration, the Digital Keyboard willreturn to its default settings whenever you turn it off.You can change the initial configuration to have theDigital Keyboard remember its latest setup or to applya predetermined setup each time you turn it on. Fordetails, see “AutoResume (Auto Resume)” (pageE-134) and “Default (Default Settings)” (page E-134).• The message “Please Wait” will remain on the displaywhile a data save operation is in progress. Do notperform any other operation while it is displayed.Turning off the Digital Keyboard or removing thememory card can cause Digital Keyboard data to bedeleted or become corrupted. It also can cause theDigital Keyboard to fail to turn on when the L-1 (P)button is pressed. If this happens, refer to“Troubleshooting” (page E-150).This Digital Keyboard is designed to turn off automatically toavoid wasting power after no operation is performed for apreset amount of time. The Auto Power Off trigger time is sixminutes under battery power and four hours under ACadaptor power.• Auto Power Off is enabled while “on” is selected for“AutoPower (Auto Power Off)” (page E-134). The initialdefault setting is “on”. To disable Auto Power Off, select“oFF” for “AutoPower” (Auto Power Off).• You also can use the procedure below to temporarilysuspend Auto Power Off while it is enabled.L-3L-3L-2L-2L-1L-1R-19R-19R-20R-20L-16L-16L-17L-17L-14L-14L-13L-13R-14R-14R-1 - R-12R-1 - R-12To turn on Digital Keyboard powerAuto Power Off