Casio Cassiopeia E-125 Getting Started Manual

Also see for Cassiopeia E-125: User guide Brochure Service manual and parts list

12Getting ReadyInitial SetupAfter you first unpack your CASSIOPEIA, perform the following initial setupprocedure before using it for the first time.1. Load the main battery (rechargeable battery pack) (page 29).ImportantBe sure to use the AC Adapter to charge the battery pack before doing anything else.Your CASSIOPEIA will not operate correctly if you load the backup battery beforecharging the battery pack.2. Use the AC Adapter to charge the battery pack.3. Load the backup battery.4. Press the [Power] button.• After a few moments the welcome screen appears.5. Follow the steps in the Welcome Wizard.6. When finished, you’ll see the Today screen.• See “Pocket PC Basics” at the back of Quick Start Guide for information about theToday screen and other Pocket PC Basics.• You also need to install ActiveSync before you can communicate with a desktopcomputer.Important• If the touch panel does not respond when you tap it or if nothing appears on thedisplay, try performing a full reset (page 36). If this does not restore proper operation,remove the main battery and the backup battery and wait for about five minutes.Reload the main battery first and then the backup battery, and perform the aboveprocedure again from step 4.• If the message “A problem with memory contents has been found...” appears onthe display, perform a full reset (page 36).