Casio Cassiopeia E-125 Getting Started Manual

Also see for Cassiopeia E-125: User guide Brochure Service manual and parts list

20Connecting the Cradle to a ComputerThe cradle has a USB cable for connection to a personal computer. Connect the end ofthe cable to a USB port of the computer to which you want to connect.Important• See “Required System Configuration” on page 21 for details on the type of computersystem required for use with the cradle.• The above illustration is one example of possible connection configurations. Thelocations and layouts of USB ports vary from computer to computer. See thedocumentation that comes with your computer for full details on connecting cables toit.• Note that after connecting the cradle to your computer, you also need to make certainActiveSync settings on your computer to enable data transfers. See the ActiveSyncHelp for details about setting up and using ActiveSync.Using the CASSIOPEIA USB CableYou can use the CASSIOPEIA USB cable to connect the CASSIOPEIA directly to acomputer.Important• See “Required System Configuration” on page 21 for the computer system that isrequired for direct USB connection.• The illustration below is just one possible connection configuration. The location andlayout of USB ports vary from computer to computer. See the documentation thatcomes with your computer for full details on connecting cables to it.• You must have ActiveSync installed on your computer in order to exchange data withthe CASSIOPEIA over a USB connection. See the Pocket PC User’s Guide forinformation on installing and using ActiveSync.