20051101If this is the triggersource: Do this next:[EXE] key Press w to finalize Trigger Setup and return to the AdvancedSetup menu.Count Down Specify the countdown start time. See “To specify thecountdown start time” below.CH1 Specify the trigger threshold value and trigger edge direction.See “To specify the trigger threshold value and trigger edgetype”, “To configure trigger threshold, trigger start edge, andtrigger end edge settings” on page 3-11 or “To configurePhotoGate trigger start and end settings” on page 3-12.SONIC Specify the trigger threshold value and motion sensor level.See “To specify the trigger threshold value and motion sensorlevel” on page 3-12.Mic Specify microphone sensitivity. See “To specify microphonesensitivity” below.[START] key Press w to finalize Trigger Setup and return to the AdvancedSetup menu.uuuuu To specify the countdown start time1. Move the highlighting to “Timer”.2. Press 1(Time) to display a dialog box for specifying the countdown start time.3. Input a value in seconds from 1 to 10.4. Press w to finalize Trigger Setup and return to the Advanced Setup menu.uuuuu To specify microphone sensitivity1. Move the highlighting to “Sense” and then press one of the function keys describe below.3. Perform one of the following operations, in accordance with the trigger source that wasselected in step 2.To select this level of microphone sensitivity: Press this key:Low 1(Low)High 3(High)Medium 2(Mid)3-10Using Advanced Setup2. Press w to finalize Trigger Setup and return to the Advanced Setup menu (page 3-1).
