Casio KL-130 User Manual

Contents

Casio KL-130 User Manual Manual pdf 16 page image

14 ENText EffectsThere are three text effects that you can assign: shading, underlining, andboxed text. The following shows examples of each.Effect Indicator SampleShadingUnderliningBoxed TextThe text effect indicators will show you when a text effect is being used.x You can use the Shading, Underline, and Box effects in combination witheach other, and even specify all three at the same time.To specify a text effect1. Press FUNC and then to display a menu of text effects.2. Use and to move the pointer to the effect you want to use.x To delete a currently applied effect, select NONE.3. Press OK to apply the settings and return to the text screen.x To apply multiple effects, repeat the above from step 1.Part 5 PrintingPrinting Precautionsx Never turn power off while printing is being in progress.x Make sure that the tape outlet is not blocked before you start printing.x Never operate the tape cutter while printing is being in progress (indicatedby the message “NOW PRINTING” on the display).Important!x Never touch the tape cutter while a tape cut operation is being in progress.Doing so can result in cuts and other personal injury.Printing a TapePrinting a tape is as easy as pressing the key.To display the print preview1. Press FUNC and then .x The print image that appears scrolls on the display for easy viewing.2. To stop the scrolling, press OK. Press OK again to restart scrolling.x After the preview (scrolling) operation is complete, the tape lengthwill appear on the display for a short while, and then the display willautomatically return to the screen that was shown before you performedstep 1, above.x To cancel preview part way through, press .To print a tape1. While the text input screen is displayed, press .x This will display the tape length, followed by a screen for specifying thenumber of copies.2. Use and , to specify the number of copies.x You can also input a value for the number of copies.3. Press OK to start printing.x To stop a print operation that is in progress, press .4. After the print operation is complete, press down on the tape cutter buttonto cut the tape.