Casio KL-130 User Manual

Contents

Casio KL-130 User Manual Manual pdf 9 page image

7 EN1. Turn off the printer.2. Turn over the Label Printer andremove the back cover while pressingdown on its lock as shown in theillustration.3. Load batteries into the batterycompartment.x Be sure to use alkaline batteries.x Make sure the plus (+) and minus(–) ends of the batteries are facingcorrectly when you load them.4. Replace the printer cover.Turning the Printer On and OffPress to turn the printer on and off.SE L ECTTAPE I DTHWx When you turn on the printer, the tape width selection screen will appear.Use and to select the tape width you will use, and then press OK.Initializing MemoryImportant!x If you are using the Label Printer for the fi rst time, you should Initialize itfi rst.x Note that initializing memory will delete all currently stored data. Youshould only initialize memory before using the printer for the first time.To initialize memory1. Make sure that printer power is off.2. While holding down the and keys, press to turn power on.x A message appears to confi rm whether you want to initialize memory.I N I T I A L I ZE ?OK / CANCEL3. Release the , , and keys.4. Press OK to initialize the Label Printer.• This displays the language setting screen.• Press to abort the reset operation5. Use and to select the display language you want and then press OK.• This displays the length unit setting screen.6. Use and to select the length unit you want and then press OK.• This displays the tape width selection screen.7. Use and to select the width of the tape you will use and then pressOK.