Casio KL-130 User Manual

Contents

Casio KL-130 User Manual Manual pdf 18 page image

16 ENPart 6 Configuring Form SettingsYou can use the procedures in this section to confi gure tape length, verticaltext, and mirror text.x For information about text alignment and pitch, see “Confi guring the PrinterSetup”(page 21).Tape Length SettingYou can use either of the methods below to specify the tape length.x AUTO: Automatically adjusts tape length in accordance with the inputcharacters.x FIX: Maintains a fi xed tape length in the range of 0cm to 99.9cm.To have tape length set automatically (AUTO)1. Press FUNC and then .2. Use and to select AUTO, and then press OK.To specify a fixed tape length (FIX)1. Press FUNC and then .2. Use and to select FIX.3. Use and to specify the tape length and then press OK.x You can also input a value for the tape length.Notex Brackets to the left and right of the display tape length value provide theinformation described below.[ 6.0 cm]: Print will be the specifi ed length.( 6.0 cm]: Print will be the specifi ed length, but text will be compressedhorizontally.6.0 cm]: Print will be longer than that specifi ed length. (Text will becompressed 50% in the text direction. Print will be longer thanspecifi ed length.)Vertical Text PrintingUse the procedure below to print text that reads vertically, from top to bottom.To enable or disable vertical text printing1. Press FUNC and then .x This causes the vertical print indicator to appear.x To cancel vertical text printing, press FUNC and then pressagain.Mirror Image TextThis setting makes it possible to print a mirror image of text.x Select mirror image text when printing with an iron-on transfer cartridge (soldseparately) for transfer to a handkerchief, T-shirt, etc.x Mirror image text can also be printed with a transparent tape cartridges(sold separately) and affi xed to the back of glass or some other transparentsurface.To configure the mirror image text setting1. Press FUNC and then .x This causes the mirror image printing indicator to appear.x To cancel mirror image printing, press FUNC and then pressagain.