EnglishControlling the Keyboard SoundsE-15You can use the following procedure to layer two differenttones (such as piano and strings) so they soundsimultaneously when you press a keyboard key.1. Select the first tone you want to use.Press bn (TONE) and then use br (10-key) to select thetone you want.2. Press cp.3. Use br (10-key) to select the second tone youwant.4. Play something on the keyboard.Both tones sound at the same time.5. Pressing cp again to unlayer the keyboard (soit plays only the tone you selected in step 1).• Each press of cp toggles between layered (two tones)and unlayered (one tone).You can use the procedure below to assign different tones tothe right range and left range of the keyboard, so it soundslike you are playing an ensemble between two instruments.1. Select the tone for the right side range (pageE-14).Press bn (TONE) and then use br (10-key) to select thetone you want.2. Press co.3. Use br (10-key) to select the left side rangetone you want.4. Play something on the keyboard.This will sound the tones assigned to the left and rightside ranges of the keyboard.Layering Two TonesExample: 032 ELEC.PIANO 1Example: 205 STRINGSE . P i a n o 1LightsS t r i ngsSplitting the Keyboard betweenTwo Different TonesTo select the two tones for a split keyboardExample: 303 FLUTE 1Example: 064 VIBRAPHONE 1F l u t e 1LightsV i b e s 1F3VIBRAPHONE 1 FLUTE 1Split point
