Casio LK-280 User Manual

Also see for LK-280: Midi implementation User guide

Contents

Casio LK-280 User Manual Manual pdf 18 page image

Controlling the Keyboard SoundsE-165. Pressing co again to unsplit the keyboard (so itplays only the tone you selected in step 1).• Each press of co toggles between split (two tones) andunsplit (one tone).• If you turn on both layer and split, layering will be applied tothe right side range of the keyboard only.1. While holding down co, press the keyboard keywhere you want the split point to be.The key you press will become the lowest note of the rightside range of the split keyboard.Reverb adds reverberation to notes. You can change theduration of the reverb.1. Press ct (FUNCTION) and then use the br(10-key) [4] (o) and [6] (p) keys to display“Reverb” (page E-7).2. Use the br (10-key) [–] and [+] keys to selectthe reverb setting you want.Chorus is a function that adds depth and breadth to notes. Itmakes you sound as if you are playing multiple instruments.1. Press ct (FUNCTION) and then use the br(10-key) [4] (o) and [6] (p) keys to display“Chorus” (page E-7).2. Use the br (10-key) [–] and [+] keys to selectthe chorus type you want.There are five chorus types, plus an off setting.• The actual effect produced by chorus depends on the toneyou are using.To change the split pointExample: Setting middle C (C4) as the split point.Using ReverbOff (oFF) Turns off reverb.1 to 10 The larger the number selected, the longerthe reverb duration.C 4Key nameR e v e r bIndicator disappears when reverb is turned off.Using ChorusC h o r u sIndicator disappears when chorus is turned off.