Playing with Different TonesE-9Reverb . . . . Makes your notes resonate.Chorus . . . Adds more breadth to your notes.To configure reverb and chorus effectsettings1. While holding down the TONE/SETTINGbutton, press the REVERB or CHORUSkeyboard key.Example: Selecting Reverb 4• Reverb Value• Chorus ValueYour digital piano comes equipped with three pedals:damper, soft, and sostenutoPedal Functionsz Damper PedalPressing the damper pedal while playing will causethe notes you play to reverberate for a very longtime.• When a GRAND PIANO tone (MODERN,CLASSIC, VARIATION) is selected as the tone,pressing this pedal will cause notes to reverberate(acoustic resonance) just like the damper pedal onan acoustic grand piano. Half-pedal operation(pressing the pedal part way) is also supported.z Soft PedalPressing this pedal while playing suppresses notesplayed on the keyboard after the pedal was pressed,and makes them sound softer.z Sostenuto PedalOnly the notes of the keys that are depressed whenthis pedal is pressed are sustained until the pedal isreleased.Using EffectsTo do this: Select this setting:Turn off reverb OFFTurn on reverb1: Room2: Small Hall3: Large Hall4: StadiumTo do this: Select this setting:Turn off chorus OFFTurn on chorus1: Light Chorus2: Medium Chorus3: Deep Chorus4: Flanger (Whooshing effect)OFF 1 2 3 4CHORUS selection keysUsing the Digital Piano’sPedalsSoft pedal Damper pedalSostenuto pedal