Recording and Play BackE-15After recording to either of the tracks of a song, you canrecord to the other track while listening to playbackwhat you recorded in the first track.1. Press the RECORDER button twice so itslamp is flashing.• At this time the L lamp will flash to indicate that thedigital piano is standing by for recording to Track 1.2. Use the LR button to select the track to whichyou want to record.• Make sure that the indicator lamp for the record trackis flashing.Track 1: L lampTrack 2: R lampExample: Track 1 Selected3. Select the tone and effects (Track 1 only) youwant to use in your recording.• Tone (page E-6)• Effect (page E-9)NOTE• If you want the metronome to sound while you arerecording, configure the beat and tempo settings, andthen press the METRONOME button. See “Using theMetronome” on page E-10 for more information.4. Start playing something on the keyboard.• Recording will start automatically.5. To stop recording, press the SONG X/button again.• This will cause the RECORDER button and LRbutton lamps to change from flashing to lit.• To play back the track you just recorded, press theSONG X/ button.6. After you are finished recording or playingback, press the RECORDER button so itslamp goes out.To record to a specific track ofa song