R-45QT-6000 Reference Manual2-5. Other check tracking system control2-5-1. The timing to clear check detail and index file after finalizationThere are two timings to clear detail and index files.1. The check is cleared after printing finalized data on slip or guest check receipt, or thecheck is also cleared when the new or old check operation is made on the terminalfinalized the transaction.2. The check is cleared after printing finalized data on slip or guest check receipt, or thecheck is also cleared when the same finalized check number is assigned in new checkoperation.This option is set on the page 40 of the programming manual.2-5-2. Table transferThis function is used for transferring the contents of a check to another check.The detail data can be excluded from the transferring check by programming (ST transfer).There are two cases depends on the status of the transferring check.1. If the transfer check is not used.The entered check number is written.2. The check number is already used.Add the contents to the existing contents.This option is set on the page 86 of the programming manual.2-5-3. Store and recallThese functions are used for the driving through purchase.The check number used in store operation is defined by check No. range programming.2-5-3-1 StoreThis function is used for storing the check No. of the registered items. The Detail / Indexat the drive-through entrance record the registered items and store it’s check No., and thenprint out the temporary receipt. A customer receives this temporary receipt, and drives upto the exit with this to receive the ordered item. The stored data transfer to the checktracking master/backup master.2-5-3-1 RecallThis function is used for recalling the transferred check No. to total the sum. The terminalat the drive-through exit recalls transferring check No. in order of the oldest record. Acustomer can receive the ordered items, and pay for them.