141Program 7TE-2200/2400 Dealer's ManualAuto-program & system utilities (Program 7)Auto-programmingUsing the auto-program function makes it possible to save and load the terminal program files. Methods available forsaving the terminal program are as follows:1) Saving onto a personal computer connected through online.2) Saving onto a CF card.To ensure quick recovery from a corrupted file resulting from user error or system failure, it is recommended that youmaintain backup copies of current terminal programs on a file basis.Terminal program files can be loaded using procedures opposite to those used for saving.NoteData except for program data and totalizer/counters, such as subtotal amount, item counter, and work area, cannot be savedby the auto-programming function.Never plug/unplug the CF card during auto-programming.Auto-programming functionsThe terminal is capable of saving and loading terminal program files. The terminal has the following transfer functions:1) Copy complete terminal files (send/receive: activation by source terminal) :Command code 900This function copies complete terminal files (except system work files) with counter and totalizers. When a file is notreserved on the target terminal, the file is created automatically. This function is used for backing up a terminal.2) Copy all terminal files (send/receive: activation by source terminal): Command code 090 (or 990)This function copies all terminal files (except system work files and terminal ID No.) with counter and totalizers. When afile is not reserved on the target terminal, the file is created automatically. This function is used for copying a terminal datato other terminal.3) Copy all terminal program files (send/receive: activation by source terminal): Command code 092This function copies all terminal files (except system work files, terminal ID No., I/O parameter table file, and consecutiveNo.) without counters and totalizers. When a file is not reserved on the target terminal, the processing file is skipped.4) Copy all terminal program files with file allocation (send/receive: activation by source terminal): Command code 992This function copies all terminal files (except system work files, terminal ID No., I/O parameter table file, and consecutiveNo.) without counters and totalizers. When a file is not reserved on the target terminal, the file is created automatically.5) Copy individual terminal program files (send/receive: activation by source terminal) Command code 0xx (xx: file No.)This function copies the specific terminal program file (except system work files) without counters and totalizers. When thespecific file is not reserved on the target terminal, it is skipped.6) Copy individual terminal program files with file creation (send/receive: activation by source terminal)Command code 9xx (xx: file No.)This function copies the specific terminal program file (except system work files) without counters and totalizers. When thespecific file is not reserved on the target terminal, it is allocated automatically.
