| 
181Application systemsTE-2200/2400 Dealer's ManualPrinting on the external printersYou can print receipts/orders on external printer. Maximum 2 external printers can be connected to a terminal. It is possibleto print out to another printer (i.e. another external, or internal R/J) for backup.The printouts from R/J printer and external printer can be divided into 3 types; 1. Receipt type, 2. Report type, and 3. Ordertype.For receipt type, only and have this option – Receipt 1/Receipt 2/Receipt 3 – of the target printer; R/J, external 1, or external 2.For report type, you can define one target printer; R/J, external 1 or external 2.For order type, each item has its own option – Order1/Order 2/Order 3 – of the target printer; R/J, external 1, or external 2.System configuration of the external printer system• Maximum 2 printers/1 terminal (Refer to the system configuration chapter.)• External printer buffer (file 049) should be allocated. (Refer to the program 5 chapter.)Setup1. Program the target printer (Order1, Order 2, Order 3) to each item by address 16 of the item individual feature program-ming.2. Program the target printer (Receipt 1, Receipt 2, Receipt 3) to or . If you want to print out thesereceipt to an external printer, select “Buffered print” of the address 05 of the general function program.3. Program the main printout destination and backup destination to the printer connection table.4. Program the I/O parameter table to define the peripheral devices including external printer(s).Note: FC operation is necessary, if you change the I/O parameter table.Backup systemIf the main destination printer is out of order (such as power failure, or paper out), the terminal sends this data to the backupdestination printer automatically.Note:1. The destination of normal registrations is “Receipt 1” (fixed).“Buffered print” of the address 05 of the general function is necessary.2. The destination of post receipts/guest receipts is programmable.“Buffered print” of the address 05 of the general function is NOT necessary.3. The destination of bill copy is programmable.“Buffered print” of the address 05 of the general function is necessary.4. You cannot back up the printouts to the R/J printer to external printers.That is, R/J printer is the last backup printer.• Receipt typeItem/keyprogrammingI/O parameterof this terminalOwn R/Jexternal1external2Receipt type 1 ~ 3Receipt type definitionOrder type definitionMain = R/J, external 1 orexternal 2Backup = R/J, external 1 orexternal 2Printer definitionlocal 1 =COM portPrinter modellocal 2 =COM portPrinter model• Report type• Order typeReport typeOrder type 1 ~ 3Main = R/J, external 1 orexternal 2Backup = R/J, external 1 orexternal 2Main = R/J, external 1 orexternal 2Backup = R/J, external 1 orexternal 2 |
