- 46 -23) In-line (ARCNET) initial test (OPTION I/O-PB14)This operation will initialize the In-line (ARCNET) function. And , when the machine isconnected to the other machine, the token signal is sent to the other machine.Wiring diagram for the connection cableSignal Pin Signal PinSD 1 SD 1RD 2 RD 2SendECRReceiveECRIn-line cableIn-line In-lineIn-line port In-line portOpeartion : s s b 6 0 7 #2 Keyb: Baud rate selection0= 156 K bps 1= 312 K bpsss: The machine ID numberNOTE1: To stop this opeartion, press any key or trun off the mode key switch.[PRINT] [DISPLAY]Dot displaySegment display7-6. To exit the diagnostic modeTo escape the diagnostic mode, execute INITIALIZE (MAC) operation.