Casio TK-6500 Service Manual

— 4 —2. INITIALIZE (MAC) OPERATION (TK-6500)1. Plug the power cord into an AC outlet.2. Set the mode switch to "OFF" position.3. While pressing the Journal feed Button, turn the mode switch to "PGM" position.4. Release the Journal feed button.5. Input the MAC CODE 1. (11 digits)6. Press "#2" key. (Wait until beep twice.)7. Input the MAC CODE 2. (3 digits. Without inline option board, do not enter any number.)8. Press "#2" key. (Initialization receipt is issued.)9. Initialize operation is executed.MAC CODE 1 : D11 to D1 (11 digits)Description Choice Program codePrint PGM mode password, when flag clear Yes = 0 D11 =No = 4Password in PGM3 to 7 mode Significant D10 to D7 =number 4 digitsMessages and descriptions are written in Significant D6 =English=0, French=1, Spanish=2, German=4 numberModel for Significant D5 =USA or Canada=2, German=4, numberOther area (0.00) =1, Other area (0) = 3Fixed number = 08 Fixed D3 D4 =Use clerk switch or push switch = 0 Significant D2 =Use clerk lock Key or secrec code key = 1 numberUse Euro only No = 0 D1 =Yes = 1MAC CODE 2 : D3 to D1 (3 digits)Description Choice Program codeInline baud rate 156Kbps = 0 D3 =312Kbps = 1Inline physical I.D. number (01 to 32) Significant D2 to D1 =number 2 digits3. F-INIT (FMAC) OPERATION1. Plug the power cord into an AC outlet.2. Set the mode switch to "OFF" position.3. While pressing the Receipt feed button , turn the mode switch to "PGM" position.4. Release the receipt feed button.5. Press "#2" key.Note : The location of "#2" key, see "HARD KEY CODE TABLE" on page 29.