DèLonghi ESAM6600 Instructions For Use Manual

Contents

152. Press the CaPPuCCino, laTTe MaCChiaTo or CaFFelaTTebutton twice (within 2 seconds).Cleaning the milk container after useImportant! Danger di scottatureWhen cleaning the internal tubes of the milk container, a littlehot water leaks out of the frothed milk tube (B5).avoid contact with splashes of water.“PreSS Clean BuTTon” flashes on the display each time youuse a milk function. To eliminate all milk residues, proceed asfollows:1. leave the milk container in the machine (you do not needto empty it);2. Place a cup or other recipient under the frothed milkspout.3. Press the “Clean” button (fig. 26) and keep pressing untilthe progress bar which appears on the display togetherwith the message “Cleaning...” is complete.4. remove the milk container and always clean the nozzlewith a sponge (fig. 27).Please note!• When “PreSS Clean BuTTon” flashes on the display, youcan still prepare any type of coffee or milk. if you have tomake a number of drinks with milk, wait until you havedelivered the last cup before cleaning the container.• The milk left in the container can be kept in therefrigerator.Programming the quantities of coffee and milk in thecupThe appliance is set by default to automatically deliver standardquantities.To change these quantities, proceed as follows:1. Place a cup under the coffee spouts and milk spout.2. Press the CAPPUCCINO button and hold down for at least8 seconds until the message “MILK FOr CAppUCCINOPrograM QuanTiTy” is displayed.3. The appliance starts delivering milk. release the button.4. once the required quantity of milk has been delivered intothe cup, press the CAPPUCCINO button again.5. after a few seconds, the appliance starts delivering coffeeinto the cup and the message “CoFFee F. CaPPuCCinoPrograM QuanTiTy” is displayed.6. once the required quantity of coffee has been deliveredinto the cup, press the CAPPUCCINO button. Coffeedelivery stops and the appliance is ready for use.The machine is now reprogrammed with the new quantities.The quantities of coffee and milk for macchiato and caffelattecan also be programmed via the same procedureHEATING WATERPreparationImportant! Danger of burns.never leave the machine unsupervised while delivering hotwater.The hot water spout becomes hot while water is being deliveredand must be handled by the handle only.1. Make sure the hot water spout is attached correctly (fig.4).2. Place a container under the water spout (as close aspossible to avoid splashes) .3. Press the button The message “hoT WaTer” isdisplayed.4. Water flows out of the spout. delivery stops automaticallyafter about 250 ml.5. To interrupt delivery of hot water manually, press thebutton again.Please note!you should not deliver hot water for more than 2 minutes ata time.Change the quantity of water delivered automatically.The appliance is set by default to automatically deliver 250ml.To modify these quantities, proceed as follows:1. Position a container under the spout.2. Press the button until the message “hoT WaTerPrograM QuanTiTy” is displayed.3. When the hot water in the cup reaches the required level,press the button again.The machine is now reprogrammed with the new quantity.ClEANINGImportant!• Do not use solvents, abrasive detergents or alcohol toclean the appliance. With de’longhi superautomaticcoffee makers, you need not use chemical products toclean the machine.• none of the components can be washed in a dishwasherapart from the milk container (B).• Do not use metal objects to remove encrustations or coffeedeposits as they could scratch metal or plastic surfaces.Cleaning the coffee makerThe following parts of the machine must be cleaned regularly:- coffee grounds container (a17),- drip tray (a15),- the inside of the machine, accessible after opening the