DAVIS DRIVERIGHT TRIP 500AL User Manual

DAVIS DRIVERIGHT TRIP 500AL User Manual Manual pdf 23 page image

Page 19You have the following options from the Trip Acceleration/Deceleration Log Screen:❏ Toggle Between Driver ID Code and Date Dis-playYou may display either the current driver IDcode or the date. To toggle between the two,press and release SET/CLEAR.❏ Page Through Stored Trip InformationPress MINUS to page backward through storedtrip information. Press PLUS to page forwardthrough stored trip information. Hold the but-ton down to increase the speed at which theTrip 500AL pages. When you reach the first orlast stored trip, the Trip 500AL will no longerpage in that direction.Odometer ScreenThe Odometer screen displays the vehicle’s odometer readingand the next service alarm mileage, both of which must be setfrom the DriveRight Vehicle Management Software. Theodometer reading is spread across the two digit registers at thebottom of the screen and may take some getting used to (theodometer reading in the screen shown below is 5,812.2 km).The displayed service alarm mileage must be multiplied by1000 to determine the mileage at which service is nextrequired for the vehicle (in the example below, service is nextrequired at 6,000 km).Odometer ScreenNOTE: The odometer readings is ALWAYS shown in the unit of measurein which it was entered. To change the unit of measure in whichit is displayed, you need to reenter the odometer reading usingthe software.DISTANCEKmNext Service Alarm Mileage (6,000 km)Odometer Reading (5,812.2 km)