Page 27Time EntryThe Time Entry screen allows you to set the time and to selectthe format (12 hour or 24 hour) in which you want time dis-played.Time Entry ScreenYou have the following options from the Time Entry Screen:❏ Set the TimeUse PLUS and MINUS to set the time. If youare displaying time in the 12 hour format,remember to choose either AM or PM. To dothis, follow the same procedure as if you werechanging the format of the time display, asexplained below.❏ Change the Time Display FormatPress and release SET/CLEAR until the PM, AM,or 24HR segment is flashing. Press PLUS tocycle through the three possible options: PM,AM, and 24HR. When the desired optionappears in the display, stop. The segment dis-played when you press MODE to exit thisscreen sets the format in which time will bedisplayed.NOTE: The unit will not automatically convert thetime from 12 hour to 24 hour or vice versa.You must enter the time in the new formatyourself.AMSETTINGS