DCLCD DCL22 User Manual
                                            | |
Contents
| 
Page18 DCL22If You Have VGA Connection on Your Video Card…1. Make sure the power of DCL22 LCD MONITOR is turned off.2. If you were previously using a CRT (bulky) monitor, pleasehook up your old monitor first and make sure your refresh rateis set to 60 Hz frequency before using the DCL22 LCDMONITOR. You can find the refresh rate information andchange it by RIGHT CLICKING on the desktop with nothingselected. After you have right clicked, select the PROPERTIESoption. Click on the SETTINGS tab. Click on the ADVANCEDbutton. Click on the MONITOR tab. In that tab, change therefresh rate to 60Hz and click on APPLY. After the refresh ratechanged, please shut down the computer and monitor.3. Obtain the VGA cable and connect to the VGA connection onyour PC. Connect the other end of the cable to your DCL22LCD MONITOR.4. Obtain the Audio In cable and connect the 3.5 mm Mini-jackcable to the Audio In connection of the monitor. Connect theother end of the 3.5 mm Mini-jack cable to your PC’s audio lineout connection.5. Turn on the power of both the DCL22 LCD MONITOR and thePC.Please Note :• The PC’s clearest picture is produced under 1680x1050at 60Hz. |
Related manuals for DCLCD DCL22
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine