GAS REQUIREMENTS8LP TANK REQUIREMENTS A dented or rusty LP tank may be hazardous and should be checked by your LP supplier. Neveruse a cylinder with a damaged valve. The LP gas cylinder must be constructed and marked in accordance with the specifications forLP gas cylinders of the U.S. Department of Transportation (DOT) and designed for use with aType 1 system only. Do not change the regulator/hose assembly from that supplied with the unit or attempt to usea Type 1 equipped regulator/hose assembly with a standard 510 POL tank/valve assembly. Thecylinder must be provided with a shut-off valve terminating in an LP gas supply cylinder valveoutlet specified, as applicable, for connection Type 1. If the appliance is stored indoors, the cylinder must be disconnected and removed from theappliance. Cylinders must be stored outdoors in a well ventilated area out of the reach of children. Gas must be turned off when not in use.