DCS BGB30-BQR Use And Care Manual

Also see for BGB30-BQR Series: Specifications Use and care guide Brochure & specs Use and care guide

20USING THE ROTISSERIECOOKING ON ROTISSERIE1. Place prepared rod into motor, lay across to other side in groove. (Fig.27)2. Verify placement as shown in Fig. 28.3. Ignite Burner, start Rotisserie Motor, and keep on High for cooking all meats on the Rotisserie.4. To check temperature, turn off motor, turn temperature to low while using your instant readthermometer. For poultry it should read 170º in breast. Thermometer should touch thebreastbone, then lift up 3/4 inch from the bone to get a more accurate temperature. Turn onmotor, return heat to high if more cooking is needed. Repeat above instructions. (Fig. 29)5. Remove Rod, using hot pads, place meat or poultry on broiler pan bottom, then remove prongs.(Fig. 30)CAUTION:The fork rods are very sharp. Keep hands away from tips when removing thefood.6. Cover with foil for a 15 to 20 minute waiting time. Meat will carve better and juices will go backinto the meat.FIG. 27 FIG. 28FIG. 29 FIG. 30