DCS CT-365SS Installation Manual

Also see for CT-304BK: Use and care manual Installation manual Use and care manual

Contents

DCS CT-365SS Installation Manual Manual pdf 9 page image

INSTALLATION INSTRUCTIONSHug unused hoHe /with screw included.(p/n 15001-22)Fasten to inside of ....cabinet face.(p/n 91807)FIG. 3AFasten bracket tobottom of chassis.(p/n 15001-22)CABINET PREPARATIONThe Dropdn Cooktop was designed for easy installation. However, for the best appearance, to concea]the raw cutout edges and to ensure a snug and secure fit, the cutouts must be precise. Use thecutout dimension information in the figures bellow for your installation. When preparing for instaH-htion, it is critical that the cabinet cutout matches the cutout dimensions provided for the cooktop fora good fit. See illustrations below for specifications.I For proper performance, the Dropdn Cooktop must be level.To achieve a flush fit of the cooktop,it will be necessary to have a flat countertop (front to back and left to right).I Be sure to check local building codes for the proper method of installation. Local codes mayvary. Installation, electrical connections, and grounding must comply with all applicable codes.NOTE: The cooktop must be completely removed from cut-out to service. The lower firebox is notsupported by the counter.DROPdN COOKTOP CUT-OUT DIMENSIONS:As defined in the"Nati0nal Fuel GasC0de"(ANSI Z22a1, latest edition),NOTE:Seemanufacturer's recommendations f0r ducting specificati0ns,A) 18" min.B) 13" max.C) S" rain.to combustiblesAD) 19-3/4" depthE) 34-3/4"for CT-36528-5/8" for CT-304F) 36" hood width rain. for CT-36530" hood width rain. for CT-304G) 2-1/2"H) S"I) 18"