This document is the property of DEPISTEO. Its contents cannot be reproduced or divulged without the company's approvalPage 43 / 78V04.07.00March 2018The response form gives the operator the expected response, and also the possibility to adapt the questions toask the patient, depending on the type of test.4.4. Master Edition LCD remote control useThe VT1 LCD remote control has a micro-controller to choose from 7 operating modes.The remote control lead connector is an RJ11 type; insert it into the intended socket. To unplug the lead, pushdown on the tongue and slowly pull out the lead.Reminder: the remote control should only be connected to the VT1.As soon as the RJ11 plug and the mains are connected, the remote control LCD screen lights up and displays amode of use for the VT1. The VT1 is ready for operation after a few seconds of initialization.
