DEPISTEO VT1 Series User Manual
                                                                              | |
Contents
| 
This document is the property of DEPISTEO. Its contents cannot be reproduced or divulged without the company's approvalPage 45 / 78V04.07.00March 20184.4.4. Choose a modeTo scroll through the tests of the selected mode, use the left and right arrows. Go from one mode to anotherby pressing on the right or left arrow.To select the displayed mode, click “OK”.4.4.5. Perform a testOnce the mode is chosen, go from one test to another with the right key, which displays the following test.Return to the previous test by pressing on the left key.4.4.6. Visual fieldWhen the remote control displays the visual field test, press “OK”. Use the right and left arrows to changelighting. To exit the test, press “OK” again.20 horizontal and vertical visual field LEDs4.4.7. StandbyAfter several minutes without use, the VT1 remote control goes on standby mode. To reactivate, press anyremote control key, or touch the VT1 forehead rest.4.4.8. Remote control response formThe form is required to note the results given by the patient. This is only supplied with the remote control, onthe CD-ROM supplied with the VT1, and can be printed as required.If a copy is given to the patient or a third party, photocopy the original.The form is composed of three parts: Patient identificationMode in progress«MANUAL»Right key / nextmodeLeft key / previousmodeLeft key / previoustestRight key / nexttestMANUALABC BI AcuityEXPERTABC BI Acuity |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine