DURKOPP ADLER 911 Operating & Installation Instructions Manual

Also see for 911: Operating & installation instructions Operating & installation instructions

11 Product DescriptionCNC-controlled sewing unit based on the class 867 with large sewingarea (sewing field size 300 x 200 mm) and a DAC III control unit withspecial software.For technical textiles manufacturers, motor vehicle equipmentmanufacturers, seat manufacturers (automotive), bag, case andbackpack manufacturers (leather/textile), shoe manufacturers.For the following applications:Bartacks on load-bearing straps, lowering harnesses, safetyharnesses, lashing straps; Attaching of labels and facing pieces;Decorative seams on shoes and legs of boots, decorative seams inspecial applications.Material:Straps, ropes, leather, webbing, airbag materials, leather cut, foamlaminate, leather- laminate- and textile plasticsDouble-lockstitch machine equipped with:Automatic sewing foot and clamp lifting, sewing stroke adjustment,thread trimmer, needle thread monitoring, thread pulling device andmultiple thread tension.Technical specificationsThe sewing unit is driven by a positioning drive.With the control unit DACIII are operated apart from the sewing drivealso two step motors needed for the X and Y motions of the seamgeometry and a Z axis for the adjustment of the sewing foot.The arm shaft of the sewing unit is directly driven by a brushless DCmotor.· Max. speed 3,000 U/min.· Stitch length up to 12.7 mm.· 99 program memory locations are available.· The programs can be sewn individually or in sequences.· Motor driven sewing foot lifting.· Pneumatic driven clamp opening/closing.· The maximum size of the sewing field is 300 mm in X direction and200 mm in Y direction.· Central oil wick lubricating for the machine head and the hook.· Equipped with a vertical hook· The BFT graphical control panel OP 7000 serves as controlelement.3