DVTEL CT-5322F Quick Installation Manual
Also see for CT-5322F: User and installation guide
                               | |
Contents
| 
CT-5322F/CT-5642F Fixed Thermal Analytic Camera QIG82.2. Connector PanelThe connector panel includes the following items:Figure 3: Connector PanelItem CommentVideo Port Connects the analog video coax cable between the camera and ananalog DVR.Ethernet PortConnects the network cable between the camera and thenetwork switch for network communication and powering theunit. The PoE+ supply requires minimum 20W. IEEE 802.3af PoE isNOT supported.Reset Button Resets the unit to full factory defaults. Hold for at least 6 secs.Alarm In PinsConnects two alarm inputs via the supplied 6-pin connector to themarked 1, 2, and ground pins. Each alarm input pin should also beconnected to the ground pin (i.e., pin 1 + ground, or pin 2 +ground).Relay Out PinsConnects the 6-pin connector to the marked NC, C, and NO pins.The NC and NO pin should also be connected to the C pin(i.e., NC + C, or NO + C).Audio In/Out Not currently supported.RS-485 Pins Not currently supported.AC/DC Pins Connects a male 3-pin connector from an AC or DC power supplyto the unit’s + (positive), – (negative), and ground leads. |
Related manuals for DVTEL CT-5322F
manualsdatabase
Your AI-powered manual search engine