DVTEL CT-5322F Quick Installation Manual
Also see for CT-5322F: User and installation guide
                               | |
Contents
| 
Accessing the Camera194. Accessing the CameraAfter installing the ioi Thermal CT-5322F/CT-5642F camera, use the camera’sweb Interface to make configuration changes and to view live video. In order tomake these changes, connect to the camera from any PC on your network.The PC must meet the following requirements: Windows 7, Windows 8, or Windows 8.1 operating system IE 8, 9, 10, or 11 browser4.1. Device DiscoveryWe recommend using DVTEL’s DNA tool to discover the camera on the network.Note:Use a DHCP server to facilitate discovery of the unit’s IP Address.Confirm that Use DHCP is checked in DNA’s Assign IP dialog box.By default, when the camera powers on, it attempts to obtain an IPaddress from a DHCP server in the network. If the camera cannotobtain an IP address through DHCP within a reasonable time, it willdefault to an IP address of 192.168.0.200 and a subnet mask of255.255.255.0.In the event that you do not have access to the DHCP server:1. Set 192.168.0.11 as the IP address for the client PC.2. Use the Windows Network tool to locate the camera and set thestatic IP address.To discover devices using DNADownload the DNA utility from the DVTEL Partner Portal or DVTEL website at http://www.dvtel.com/services-support/firmware-software/.Click the DNA icon and run the DNA utility (DNA.exe). DNAdiscovers all devices on the VLAN.Assign IP address to the device.Click the Login icon and enter login credentials for the devices. |
Related manuals for DVTEL CT-5322F
manualsdatabase
Your AI-powered manual search engine