12Help MenuThe HelP key on your oven can help you to better under-stand how your oven works. The HelP key appears onthe control panel display most of the time after you haveselected one of your oven’s features. If you want to findout more about the various choices available to you, pressthe HelP key.Here is an example:If you have a double oven, press the• uPPer on/oFFor loWer on/oFF key to select the oven you wantto use.press the• BaKe key.The• BaKe screen appears.press• HelP.The• HelP screen appears with a description of how touse the bake mode (setting).Deluxe FeaturesBAKEPURECONV/SEARPURECONVECTIONMAXBROILDACORGUIDEMAINMENU▲ UPPER ▼ LOWER12:25 PMDELAYOPTIONS SAVEMEATPROBE HELP▲ UPPER12:25 PMPRESS START350°FBAKEOK DELAY SAVE PROBEBAKEUSES BOTTOM HEATTHIS MODE IS THE STAND-BY NON-CONVECTION MODE.USE RACK 1 OR 2.MODETo find out what each of the keys on the bake screen•does, press that key. For example, if you press theDelaY key, the display tells you about what theDelaY oPtIons mode does.press• oK to return to the BaKe screen or CanCel/seCure to return to the home screen.OK SAVE PROBEDELAY OPTIONSTHIS SELECTION PUTS YOU INTO THE DELAY OPTIONS EDIT SCREEN.THESE SETTINGS WILL BE SAVED IF FILE IS SAVED.SELECT OK TO RETURN TO THE EDIT SCREEN.MODE DELAYnote: pressing the CanCel/seCure key does NOT turnoff the timers.Your wall oven is equipped with two built-in timers:You can use both of them at the same time.•They have distinctive alarm tones so that once time•runs out, you can tell which one has beeped.You may want to set each timer for a few seconds and•let time run out so that you can hear the differencebetween the 2 tones.to use the timers on Your oven:press the• tImer key.The timer screen appears.•press the• tImer 1 or tImer 2 key. For example,press tImer 1.TIMER 1HH:MM:SSDIRECTIONDOWNCANCELTIMER 1 TIMER 2 DIRECTIONCANCELTIMER 2PRESS START12:25 PMTIMER 100:00:00TimerswarningThe timers on your oven do not turn the oven on oroff. They are only for timing purposes. When you wantto turn the oven on or off automatically, use the delayoptions (see page 23)