Dacor HDPR30S Installation Instructions And Owner's Manual

Also see for HDER30S: Installation instructions User manual User manual

Dacor HDPR30S Installation Instructions And Owner's Manual Manual pdf 20 page image

20EnglishInstallation InstructionsPreparing for Installation• If the gas or electric service provided does not meet the product specifications, discontinue installation,and call the dealer, gas supplier, or a licensed electrician.• Before moving the range into place, install the anti-tip bracket (see below for instructions).Unpacking the RangeUnpack the parts box, and verify that all specified components are present (see Pg. 9 or 10). If any item is miss-ing or damaged, contact your dealer immediately. Do not install a damaged or incomplete range.Installing a Backguard (optional)Install the backguard before making the range gas and electrical connections. Install according to the back-guard kit instructions.Approved Backguard Models Backguard Description For Range ModelAPB30D3 3” tall for model HDPRS30, HDERS30APB30D9 9” tall for model HDPRS30, HDERS30APB36D3 3” tall for model HDPRS36, HDERS36APB36D9 9” tall for model HDPRS36, HDERS36APB48D3 3” tall for model HDPRS48, HDERS48APB48D9 9” tall for model HDPRS48, HDERS48Installing the Anti-tip Bracket and FootThere are two ways to mount the anti-tip bracket: Floor mounting (preferred), and wall mounting (Pg. 19).Wall-mount the bracket if floor mounting is unsuitable; however, if the range’s front panel is over 26 1/2” (67.3cm) from the back wall or if the floor is too thick, floor mounting must be used.Floor-Mounting the Anti-tip BracketTo perform as designed, the anti-tip bracket must attach to the concrete slab or wood sub-floor below anyupper flooring (including cement board). Do not attach the anti-tip bracket directly to floor coverings suchas ceramic/asphalt tile or linoleum.• Four plastic anchors are provided with three sizes (4 each)of #8 and #12 Phillips head screws for attaching the anti-tipbracket to the floor. Use both anchors and four of the screwsto attach the bracket to a concrete sub-floor. Do not useanchors on a wood sub-floor.• Determine the location of the range center line and frontpanel for the range’s final position (see Product Dimen-sions, Pg. 13) and the actual cabinet/cutout dimensionsused for the installation.